This list explains how fast an 87 mph fastball reaches a hitter from 46 feet, why that differs from a regulation pitch, and what the timing means for practice. It is for baseball players, coaches, parents, and fans comparing pitching speeds or designing safe reaction drills.
The Basic Timing
- About 0.36 seconds is the idealized travel time from 46 feet at 87 mph, using distance divided by speed.
- 87 mph equals 127.6 feet per second because one mile per hour converts to about 1.4667 feet per second.
- The calculation is 46 ÷ 127.6, which gives roughly 0.360 seconds before rounding.
- That is about 360 milliseconds, a useful unit when discussing a hitter’s available response window.
- The estimate assumes constant speed, so it is a simple comparison rather than a full flight model.
- Air resistance can reduce a baseball’s speed as it travels, making actual arrival time slightly longer than the constant-speed estimate.
- Pitch speed is normally reported near release, so a radar reading is not necessarily the ball’s speed at the plate.
- Spin, seams, and aerodynamic forces affect a pitch’s path, but do not make the basic distance-and-speed calculation a precise trajectory forecast.
- Reaction time is not the same as travel time: the hitter must see, identify, decide, and begin moving within that interval.
- A batter may start preparing before release, so a swing is not simply a reflex initiated after the ball appears.
- The 0.36-second figure is an average-style estimate for the stated inputs, not a guarantee for every pitch.
- Small changes in either speed or distance change the result, which is why both numbers should be stated together.
What the 46-Foot Distance Means
- 46 feet is shorter than the 60 feet, 6 inches between a regulation MLB pitching rubber and home plate.
- At 87 mph, the same constant-speed calculation over 60 feet, 6 inches is about 0.47 seconds.
- A 46-foot setup therefore gives a batter less flight time than a full-distance pitch at the same speed.
- 46 feet is often useful for controlled practice or comparison, but it should not be mistaken for standard adult game geometry.
- Little League pitching distances vary by age division, so check the current league rulebook rather than assuming one universal distance.
- Measure from the release point to the relevant contact point when a drill’s distance needs to be repeatable.
- Measuring from the rubber instead of the release point can overstate the distance the ball actually travels.
- Home plate is 17 inches wide, so a pitch’s path and location matter alongside its speed and travel time.
- A pitcher’s stride moves the release point closer to the hitter, which makes release-to-plate distance shorter than rubber-to-plate distance.
- For a fair comparison, record whether the stated 46 feet is measured from the rubber or from release.
- A pitching machine’s wheel or outlet is its release point, so measure from there when estimating machine-pitch travel time.
- Use the same measurement method across sessions to tell whether a drill has actually changed.
How Speed Changes the Window
- At 46 feet and 80 mph, constant-speed travel takes about 0.39 seconds, leaving more time than at 87 mph.
- At 46 feet and 90 mph, the estimate is about 0.35 seconds, showing how a few mph matter.
- At 46 feet and 70 mph, the calculation is about 0.45 seconds, which can suit a developing hitter’s controlled drill.
- At 46 feet and 100 mph, the estimate is about 0.31 seconds, though this is not a recommendation for close-range practice.
- At a fixed distance, faster pitches always produce a shorter calculated travel time.
- At a fixed speed, a longer distance produces a longer calculated travel time.
- Do not compare radar numbers from different devices without checking their placement and measurement method.
- Radar guns may capture speed at different points, so two readings can differ even on the same pitch.
- Use a verified speed reading and measured distance if you want to reproduce the 0.36-second estimate.
- A coach can change one variable at a time—speed or distance—to make a drill’s demands easier to interpret.
- Speed alone does not describe difficulty; location, movement, release visibility, and the hitter’s readiness also matter.
- A slower pitch with late movement can still challenge timing because the hitter must adjust to its path.
What a Hitter Must Process
- The hitter first has to pick up the ball against the background, so clear sightlines help in practice.
- Release cues can help a hitter anticipate pitch type, but they do not reveal every pitch with certainty.
- Fastball recognition is a decision under time pressure, not just a test of hand speed.
- The hitter must judge whether the pitch is likely to enter the strike zone before committing to a swing.
- Plate discipline requires sometimes withholding the swing, even when the pitch is moving quickly.
- A balanced stance makes it easier to adjust than a posture that leaves the hitter off balance.
- Early preparation can help a hitter be ready without requiring a premature, uncontrolled swing.
- Tracking the ball through release gives the eyes useful information about direction and speed.
- A pitch’s apparent approach can be misleading, so repeated observation is more useful than guessing from one throw.
- Different batters have different visual and movement skills, making one reaction-time number a poor measure of overall ability.
- Contact timing also depends on swing length and bat speed, not only on how quickly a player notices the pitch.
- A hitter who starts late may improve by refining preparation and recognition rather than simply trying to swing harder.
Using the Number in Practice
- Begin with a comfortable speed and increase it gradually, so the hitter can maintain control and sound mechanics.
- Use a pitching machine when repeatable speed and location are more important than practicing against a pitcher’s delivery.
- Use front toss only from a safe, coach-controlled setup with appropriate protective equipment.
- For reaction work, vary pitch locations at a manageable speed rather than making every repetition a maximum-speed test.
- Call out “take” or “swing” before the pitch in a decision drill to practice judgment as well as contact.
- Track whether the hitter makes a good decision, not just whether the bat touches the ball.
- Use protective screens for coaches and operators working near a pitching machine or live batting practice.
- Require a properly fitted batting helmet during hitting drills, following league and facility rules.
- Keep other players outside the ball’s path and establish a clear signal before anyone enters the hitting area.
- Stop a drill if the hitter is fatigued or losing control; tired swings can degrade mechanics and safety.
- Use age-appropriate equipment and speeds, and follow the machine manufacturer’s operating instructions.
- Record distance, speed, pitch type, and drill conditions so results from different sessions can be compared fairly.
Common Misreadings
- “Reaction time” in this context usually means ball flight time, not a lab measurement of a person’s reflexes.
- The 0.36-second estimate does not mean a hitter has all 360 milliseconds available to decide and complete a swing.
- Batters often begin their movement before the ball reaches the plate, so the swing’s timing sequence overlaps the flight.
- A pitch clock measures time between game events, not the ball’s travel time to the plate.
- Pitch speed cannot be converted to travel time without specifying distance.
- Distance cannot be converted to travel time without specifying speed.
- “87 mph from 46 feet” is not equivalent to “87 mph from 60 feet, 6 inches” for the hitter’s available flight time.
- A displayed speed may be rounded, so a calculation based on 87 mph is also approximate.
- Do not infer that every hitter should face 87 mph from 46 feet; training level and safety need individual judgment.
- Do not use a close-distance, high-speed drill without suitable training equipment, supervision, and protection.
- A ball’s flight is not perfectly uniform, so the calculation is best used as a clear benchmark.
- Reaction drills can train recognition and decisions, but they cannot guarantee a particular game batting result.
Quick Reference Calculations
- Formula: time in seconds equals distance in feet divided by speed in feet per second.
- Conversion: speed in feet per second equals mph multiplied by 1.4667.
- For 87 mph, the converted speed is about 127.6 feet per second.
- For 46 feet, dividing 46 by 127.6 gives approximately 0.36 seconds.
- For a calculator, enter 46 ÷ (87 × 1.4667) to reproduce the estimate.
- Keep units consistent; dividing feet by miles per hour directly produces the wrong result.
- Round the result to two decimal places for a quick comparison, or retain milliseconds for timing discussion.
- When comparing distances, keep the same speed and conversion method to isolate the distance effect.
- When comparing speeds, keep distance fixed so the difference reflects speed rather than setup.
How to Use This List
Start with items 1–12 for the headline estimate, then use the distance and speed sections to compare a particular drill. If you are coaching, write down the measured release-to-contact distance and the source of the speed reading. For hitters, prioritize safe, repeatable practice and good decisions over chasing a single reaction-time score.
Frequently Asked Questions
How long does an 87 mph fastball take to travel 46 feet?
About 0.36 seconds under the constant-speed calculation; actual flight can differ slightly.
Is 46 feet a regulation pitching distance?
Not for standard MLB play, where the rubber is 60 feet, 6 inches from home plate. Youth distances depend on the division.
Does the hitter have 0.36 seconds to swing?
Not exactly. That is estimated ball-flight time, while recognition, decision-making, and swing preparation overlap.
How is the estimate calculated?
Convert 87 mph to about 127.6 feet per second, then divide 46 feet by that speed.
Will a 46-foot drill prepare every player for game pitching?
No. It can train specific skills, but distance, speed, pitch movement, age, and safe supervision all matter.
Final Thoughts
An 87 mph fastball covers 46 feet in roughly 0.36 seconds by a straightforward calculation. Treat that as a useful benchmark, not a complete measure of hitting ability or a substitute for safe, well-designed practice.
