Major League Baseball pitches commonly travel from the low 90s to the upper 90s in miles per hour, but speed varies by pitcher, pitch type, and situation. Many fastballs are around 93–97 mph; elite relievers can reach 100 mph or more, while off-speed pitches such as changeups and curveballs are deliberately slower.
What MLB Pitch Speed Means
Pitch speed is the velocity of a pitch, usually reported in miles per hour (mph). In a televised game, the number shown is generally measured by tracking systems as the ball moves toward home plate. It is a useful snapshot, not a complete measure of a pitch’s quality: location, movement, release point, deception, and the batter’s timing all matter too.
There is no single “average MLB pitch speed” that describes every pitch. A starter may throw a fastball in the mid-90s and use several slower offerings; a reliever may throw harder because he is working in shorter bursts. A pitcher’s velocity also changes with workload, health, mechanics, and the particular game.
Typical Speeds by Pitch Type
These are broad contemporary ranges, not requirements or fixed league-wide limits. Individual pitchers can fall outside them, and the same pitcher may vary speed from one pitch to the next.
- Four-seam fastball: commonly about 93–97 mph for MLB pitchers, with the hardest throwers reaching or exceeding 100 mph.
- Two-seam fastball or sinker: often in the low-to-mid 90s. Its arm-side run or downward action can be as important as raw velocity.
- Cutter: typically around the upper 80s to low 90s, though some pitchers throw it harder. It combines fastball speed with shorter, later movement.
- Slider: often in the low-to-mid 80s, but harder versions can approach fastball velocity. The pitch is valued for its lateral and downward break.
- Curveball: commonly in the upper 70s to low 80s, with a pronounced downward break. Some power curveballs are faster.
- Changeup: often in the low-to-mid 80s, usually roughly 8–12 mph slower than that pitcher’s fastball. The speed difference helps disrupt a hitter’s timing.
- Splitter: usually in the mid-to-upper 80s or low 90s, with a late drop that can make it look like a fastball before it falls.
Pitch classifications overlap. A hard slider may be faster than another pitcher’s cutter, and tracking labels can depend on the system’s classification and the pitch’s movement.
How Pitch Speed Is Measured
Modern MLB pitch tracking uses high-speed cameras and radar-based technology to follow the ball. MLB’s Statcast system, powered by Hawk-Eye tracking, records pitch characteristics including velocity and movement. The broadcast graphic and the data displayed later may reflect different measurement points or processing, so small differences between readings can occur.
Velocity depends on where it is measured. A ball slows as it travels through the air, so a reading near the pitcher’s release is higher than one taken closer to home plate. Older radar guns often reported a speed at a different point in the flight than newer tracking systems. This is one reason historical speed comparisons require caution: a figure from one era may not have been collected in the same way as a modern figure.
For a fair comparison, check that the numbers use similar definitions and measurement methods. A stadium display, a scouting report, and a historical record may not be directly interchangeable even if each is labeled “mph.”
Why Velocity Matters—and What It Doesn’t Tell You
A faster pitch gives a batter less time to identify and swing at it. At 95 mph, a pitch takes roughly four-tenths of a second to travel from the release area to the plate; the exact time varies with release point, flight path, and measurement assumptions. The hitter must decide whether to swing before the ball arrives, making every fraction of a second important.
But velocity alone does not determine effectiveness. A 92 mph fastball with excellent location and movement can be tougher than a straight 98 mph pitch that stays over the middle of the plate. Pitchers also use changes of speed to unsettle timing: a well-commanded 84 mph changeup can be more effective when it follows a 96 mph fastball.
Other useful context includes:
- Movement: how far the ball breaks and in what direction.
- Command: whether the pitcher can repeatedly put the pitch where intended.
- Release and deception: how early the hitter can see the ball and distinguish its type.
- Pitch sequencing: how one pitch changes the batter’s expectation of the next.
Starters, Relievers, and Changes Over a Season
Relievers often throw harder on average than starting pitchers because they typically work for shorter stretches and can exert maximum effort on a smaller number of pitches. Starters need to manage energy across several innings, though many starters still reach the upper 90s. Role alone does not determine velocity: training, individual mechanics, health, and pitching style all contribute.
Velocity can also fluctuate within a game. Fatigue, a pitcher’s effort, and physical condition may affect readings. A sustained drop from a pitcher’s normal range can be worth monitoring, but one lower reading is not proof of injury: measurement variation, pitch type, and conditions can explain it. Teams evaluate velocity alongside command, movement, workload, and a pitcher’s own reports of how he feels.
Record Speeds and Common Misconceptions
Reports of the fastest pitches depend on the era and measurement method. A frequently cited modern benchmark is Aroldis Chapman’s 105.8 mph fastball, recorded in 2010 by the radar system then used by MLB. It is best treated as a reported tracking record under that system, not as a perfectly comparable number to every pitch ever recorded. Older claims may use different devices, measurement locations, or standards.
Another misconception is that every pitch labeled a fastball should be close to 100 mph. In reality, MLB pitchers succeed with a wide range of fastball velocities. A pitcher’s arsenal is built around what works for that individual, and slower pitches are not inferior simply because they register fewer miles per hour.
Frequently Asked Questions
How fast is the average MLB fastball?
There is not one fixed average for every pitcher and season. A typical modern MLB four-seam fastball is often in the low-to-mid 90s, while individual pitchers may throw slower or faster. Averages also depend on whether the statistic includes all fastball types and how velocity is measured.
How fast is a 100 mph pitch in kilometers per hour?
A pitch traveling 100 mph is about 161 kilometers per hour. To convert mph to km/h, multiply by approximately 1.609.
Are MLB pitchers throwing harder than they used to?
Average fastball velocity has generally risen over the modern tracking era, reflecting changes in player development, training, and how pitchers are used. Long-term comparisons are complicated because measurement technology and methods have changed, especially when comparing modern readings with older radar-gun figures.
How fast is a pitch when it reaches the batter?
It is slower than it was near release because air resistance reduces the ball’s speed during flight. The amount depends on the pitch and conditions, and public readings may use different measurement points. That is why a displayed velocity should not always be interpreted as the exact speed at the plate.
Is a faster pitch always harder to hit?
No. High velocity reduces reaction time, but batters also have to deal with location, movement, deception, and changes in speed. A well-placed breaking ball or changeup can be difficult to hit even when it is much slower than a fastball.
